SPECIFICATION: Input Voltage: 4S-14S Lipo Cells Continuous Current (Surge): 300A (380A) BEC: no(OPTO) Programmability: Supplied cable after software download to PC , HiFei USB Linker Data Logger: yes Dimension: 120mmx80mmx35mm (excluding water outlet ) Weight: 400g(Completely WaterProof) 32-bit Microprocessor Controlled with up to 80Mhz frequency Aluminum PCB Technology makes the heat dissipation more efficiency The Most Advanced Automotive Level High Power Ultra-Low Internal Resistance 263-7 MOSFETs Telemetry Real Time Data by Wireless WIFI Built-In Data Logger (record critical parameters: Current/Voltage/Motor RPM/Temperature/Throttle Travel), requires options USB programmer, and WIFI dongle. Integrated the double water cooler, Anti splash water High rate adjustable switching (PWM:8KHz/12KHz/16KHz) Programmable low voltage cut-off Programmable Cutoff voltage/cell Programmable cut-off types(soft cut-off/hard cut-off) Time advance programmable (auto / low / middle / high,0~30 degree optional) Programmable start-up type(soft start / standard start / fast start) Programmable Active FreeWheeling ( ON / OFF ) Programmable Current Limiting ( Low / Middle / High / Disabled ) Runs motor in forward or reverse by swapping any two motor wire connections. Safe ‘power on’ arming program ensures motor will not accidentally turn on. Auto shut down when signal is lost or radio interference becomes severe for more than 0.3 seconds .After radio connection has been re-established, moving the throttle to the lowest position can restart the motor. The ESC is disabled when the voltage is over 63 v at power-on This comes from Australian provider so please allow two weeks for receipt.
Swordfish X 300 CW 4-14S ESC with data logging